Some restrictions apply, including limited to industrial accounts with company email. No gmail, hotmail etc.
Sample pack includes: One hanger of each size, both HS and P.
Snap N Strut nylon pipe and conduit hanger. The fastest, most
versatile, and thoroughly engineered one-piece hinged pipe hangers,
cable hangers, and conduit hangers ever made.
SnapNStrut
P
This patented hanger can
either
be threaded onto a rod, or snapped into a strut, without the use of
extra hardware or tools! The pipe is simply snapped into the hanger and
locked in
place using the snug-fit size-adjusting lock arm.
SnapNStrut
Handy Snap
Used for supporting
conduits on
flat surfaces (as shown below), such as beams, walls, machinery or the
flat side of a strut. Like the Strut-N-Rod Hanger, Handy-Snap hangers
accept several
different pipe sizes. Offset design allows space for fittings and
couplings.
Performance
The SnapNStrut line of pipe hangers is
produced from a high-performance, UV
stabilized 6/6 nylon resin possessing exceptional long term stress
resistance and chemical stability over a wide range of temperatures.
Produced from a specialty engineered,
high strength, high temperature nylon
resin, the SnapNStrut pipe hangers allow for larger factors of safety: at
250°F, working temperatures and for intermediate temperatures up to 480°F. For
refrigeration, allowable working temperatures down to -70°F.
The hinged, snap-on lock arm adjusts for pipe O.D. variations,
affording each hanger the ability to accommodate several different pipe sizes.
The pipe is nestled in a snug fit without any crimping of its wall.
With a totally non-metallic design,
there is no need to isolate copper tubing. Eliminate the concern for galvanic
corrosion. The SnapNStrut hangers will withstand
most commonly encountered chemicals and refrigerants, including Freon and
Ammonia (chemical resistance charts available upon request).
The nature of the nylon material
utilized, combined with the uniquely engineered design, absorbs vibration and acts as a cushion between the piping and its
supporting structure.
When used in a strut, the upper
and lower engagement plates are designed to grip the strut and restrain lateral movement along its length.
Each SnapNStrut P hanger is threaded to
receive a rod and each can be snapped into a strut. Handy-Snap hangers possess
two receptacles for screw mounting to a flat surface (i.e., walls, beams, flat
side of strut or machinery) while automatically positioning pipe center line to
allow space for fittings. Each hanger accommodates several different sizes and
all types of pipe, conduit and tubing.
When used in a strut, SnapNStrut P pipe
support hangers are self gripping. When used on a rod, the hanger itself is
threaded onto the rod. when the pipe is inserted into the hanger, the hanger
can no longer turn. Thus, even the need
for a lock nut is eliminated.
Versatile
hangers for many different jobs means less inventory required.